SARIX ADVANCED SAMPLE High Speed Micro EDM Drilling without material deformation ● no burrs and no cracks ● perfect straightness hole diameter range 0.1 mm to 3.0 mm Electrode size from 0.08 to 3.0 mm Hole cylindricity 0.001 mm * Tolerance down to 0.002 mm * Surface finishing down to Ra 0.10 microns * Hole deviation down […]
Month’s sample selection 12-2023
SARIX ADVANCED SAMPLE Micro EDM DIE SINKING for creating complex shapes and features with tight tolerance on hard material ● copper electrode created by Micro EDM Milling ● size precision of +/- 0.002 mm ● high surface finishing between Ra 0.05-0.10 microns Micro Die Sinking sample Work piece Material hardened steel 55 Hrc Electrode size 1.20 mm Profile width […]
Month’s sample selection 11-2023
SARIX ADVANCED SAMPLE Micro EDM blind hole drilling with perfect flat bottom hole control ● high depth precision of +/- 0.01 on 15 mm ● cylindricity max 0.005 mm ● perfect straightness Blind hole diameter 1.0 mm on 15 mm Material solid carbide WC 6% Co Electrode size 0.95 mm Hole diameter 1.005 mm Tolerance 0/+ 0.01 mm Surface […]
Month’s sample selection 10-2023
SARIX ADVANCED SAMPLE Micro EDM Deep Hole drilling wire start hole diameter 0.10 on 15 mm ● maximum hole diameter 0.105 on 15 mm ● perfect straightness Effective hole 0.10 mm (100 microns) Material solid carbide WC Electrode size 0.10 mm Hole diameter 0.105 mm Tolerance 0/+ 0.005 mm Surface finishing Ra 0.25 microns Hole deviation 0.005-0.010 mm […]
Month’s sample selection 9-2023
SARIX ADVANCED SAMPLE 3D Micro EDM Milling for Watch Molding application ● high precision gear profile ● perfect shaped angle on bottom floor 2 stage Micro gear cavity molding die Hardened steel 55 Hrc Electrode size 0.30 / 0.12 / 0.06 mm Teeth Modul size 0.10 Tolerance +/- 0.002 mm Wall surface finishing Ra 0.080 microns Floor […]
Month’s sample selection 8-2023
SARIX ADVANCED SAMPLE Micro EDM tubing drilling for Medical device application ● burrs free holes ● no heated effected zone Micro tubing drilling – needle – catheter Stainless steel 316 L Electrode size 0.28 mm Tube size 0.50 mm Tolerance +/- 0.01 mm Surface finishing Ra 0.15 microns Hole burrs free entry and exit SARIX SAMPLE 08-2023 Click here […]
Month’s sample selection 7-2023
SARIX ADVANCED SAMPLE 3D Micro EDM Milling for Micro molding application ● perfect shaped angle between wall & floor ● pin high precision repeatability Micro pin molding die Hardened steel 55 Hrc Electrode size 0.30 mm Pin size 0.45 mm Tolerance +/- 0.002 mm Wall surface finishing Ra 0.080 microns Floor surface finishing Ra 0.180 microns SARIX SAMPLE […]